Bricking is the state when you’re no longer have permission to access your device. Your device went nuts that time and stays in power off condition and demand for a new software upgrade.
While rooting your phone there is only 1% chance that your phone is bricked and that kind of bricking is commonly known as soft bricking which can be recovered to normal state using custom recovery of Android.
Your phone will be hard bricked only in the condition when you flash your phone with wrong firmware or custom ROM.
What is Bricking? How To Fix Android Brick
It occurs just because of following wrong steps while rooting or while installing some external ROMs. A bricked android device doesn’t loop the booting process. It does nothing. It sits, dead… like a (wait for it) brick. Bricks don’t loop. Bricks don’t do anything. If the android device is bricked, it is likely there is nothing you can do with it other than replacing it.
If the device is looping, you might be able to reflash the firmware. You’d try to boot the device in factory recovery mode, or download mode. You’d see if it responded to turning it on while holding the home button AND the down volume. Or… if your android device doesn’t have a physical home button to press, you could do power and down volume.
How To Root Android Device?
You just have to kingroot download for your device and rest of the work would be easily done by itself. You don’t have to much, except for clicking for one or two times.
This app is one of the most favourable app for Android rooting, that’s why I’m recommending you to go with it instead of any other app.
If you want case study of rooting then click here.
Types of Brick
- Soft Brick
- Hard Brick
1: Soft brick
A soft brick, is usually just when you’re phone is stuck in a bootloop, and as the name implies, is caused by a software error, usually the lack of a system to boot from or some other minor software bug that glitching boot. They are easily fixable by reflashing your ROM in recovery.
2: Hard brick
Hard brick is the state of android device that occurs when your device is unbootable without a bootloop. A hard Brick device generally show little to no signs of life. If this happens, you had better to buy a new device since your device is showing you a black or grey screen at this point.
How to Fix Android Brick
You do this if you haven’t done the reset already. Deleting the system cache will force your device to create new ones and those new sets of files may just work properly with the system. The thing is system caches can easily get corrupted during updates and frequently turning on and off of the phone may also lead to the same problem. So, after doing the first two steps and the problem persists, then this is the next thing you should do:
- Turn off the phone.
- Press and then hold the Home and Volume UP keys, then press and hold the Power key.
- When the Samsung Galaxy S7 Edge shows on the screen, release the Power key but continue holding the Home and Volume Up keys.
- When the Android logo shows, you may release both keys and leave the phone be for about 30 to 60 seconds.
- Using the Volume Down key, navigate through the options and highlight ‘wipe cache partition.’
- Once highlighted, you may press the Power key to select it.
- Now highlight the option ‘Yes’ using the Volume Down key and press the Power button to select it.
- Wait until your phone is finished wiping the cache partition. Once completed, highlight ‘Reboot system now’ and press the Power key.
- The phone will now reboot longer than usual.
So this was the article about the brick phone, I hope that you have enjoyed our post and got some interesting information about What is Bricking? How To Fix Android Brick. If you any question or query, you can ask directly via comments. I feel happy to hear your thoughts, and love to help you out.